Operation Manual

If a device error is displayed, refer to Windows help to resolve the error.
Error Number: 300 Is Displayed
Check 1: If the
Power
lamp is off, make sure that the power plug is plugged in,
then turn the machine on.
While the
Power
lamp is flashing green, the machine is initializing. Wait until the
Power
lamp
stops flashing and remains lit green.
Check 2: Make sure that the USB cable is securely plugged in to the machine
and the computer.
If you are using a relay device such as a USB hub, disconnect it, connect the machine
directly to the computer, and try printing again. If printing starts normally, there is a
problem with the relay device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try
printing again.
Check 3: Make sure that your machine's name is selected in the Print dialog
box.
Opening the Page Setup and Print Dialog Box (Macintosh)
Error Number: 1700 Is Displayed
See
E, 0, 8
in
An Error Code Is Displayed on the LED
and take the appropriate
action.
Ink Info Number: 1688 Is Displayed
See
E, 1, 6
in
An Error Code Is Displayed on the LED
and take the appropriate
action.
Ink Info Number: 1686 Is Displayed
See
E, 1, 3
in
An Error Code Is Displayed on the LED
and take the appropriate
action.
Error Number: 2001 Is Displayed (MP270 series only)
See
E, 0, 9
in
An Error Code Is Displayed on the LED
and take the appropriate
action.
Error Number: 2002 Is Displayed (MP270 series only)
See
E, 1, 9
in
An Error Code Is Displayed on the LED
and take the appropriate
action.
Other Error Messages
Check: If an error message is displayed outside the printer status monitor, check
the following:
Page 612 of 678 pagesMessage Appears on the Computer Screen