Operation Manual

2.
Make sure that the
Access
lamp is lit, and remove the memory card.
Hold the part of the memory card that is sticking out and remove it from the machine straightforward.
Caution
Do not remove the memory card while the
Access
lamp is flashing. The
Access
lamp flashes
while the machine is reading or writing data from/to the memory card. If you remove the
memory card or turn off the power while the
Access
lamp is flashing, the data saved on the
memory card can be damaged.
3.
Close the Card Slot Cover.
Page top
Page 20 of 681 pagesInserting the Memory Card