Operation Manual

Remove the original on the Platen Glass after copying is completed.
Important
Do not open the Document Cover or move the loaded original until the copying is completed.
Note
To cancel copying, press the
Stop
button.
Setting Items
(1)
Copy type
Select the copy type: Borderless copy, Frame erase, etc. See Using Various Copy Functions
.
(2)
Magnification
You can select Fit to page to make the copy automatically enlarged or reduced to fit the selected page size.
See
Using Various Copy Functions
.
(3)
Page size
Select the page size of the loaded paper: A4, 8.5" x 11" (LTR), etc.
(4)
Media type
Select the media type of the loaded paper: Plain paper, Glossy, etc.
(5)
Print quality
A
djust the print quality according to the original to copy: Print quality (quality-priority), Print quality
(standard), or Print quality (speed-priority). The available print quality depends on the paper
selected in Media type.
Note
Settings such as the page size, media type, and print quality are retained, and these settings
will appear next time the copy mode is selected even if the power is turned off and on.
Some items cannot be specified in combination depending on the function.
You can specify the amount of extension in Extension amount under Device settings, when
Borderless copy is selected for the copy type.
You can set the print quality to Print quality
(speed-quality) only when plain paper is
selected for the media type.
If you select Print quality
(speed-priority) with the media type set to Plain paper and the
quality is not as good as expected, select Print quality
(standard) or Print quality
(quality-priority) and then try copying again.
When you make black & white copies by pressing the
Black
button, select Print quality
(quality-priority) for the print quality to render tones in range of gray (grayscale copy).
You can specify auto intensity. This function automatically adjusts the intensity of the original
on the Platen Glass. See Machine Settings
.
Page top
Page 24 of 681 pagesCopying Documents