Operation Manual

A
dvanced Guide
> Printing Using the Operation Panel of the Machine > Printing from a Memory Card > Setting Up the
Card Slot as the Memory Card Drive of the Computer
Setting Up the Card Slot as the Memory Card Drive of the
Computer
The Card Slot of the machine can also be used as the memory card drive of the computer.
Important
When Read/write attribute under Device settings is set to Writable from PC using the
Operation Panel of the machine, card direct printing cannot be done. After using the Card Slot
as the memory card drive of the computer, remove the memory card, be sure to set Read/write
attribute to Not writable from PC. When you turned off the machine, Writable from PC will be
canceled and the setting is returned to Not writable from PC when you turn on the machine
next time.
1.
Make sure that the memory card is not set.
If the memory card is set, remove it from the Card Slot. For details, refer to Printing from a
Memory Card
.
2.
Press the
Menu
button.
3.
Use the
button to select Device settings, then press the
OK
button.
4.
Use the
button to select Read/write attribute, then press the
OK
button.
5.
Specify the read/write attribute.
Not writable from PC
The Card Slot is used only for reading. Be sure to select this mode when printing photos from
a memory card.
Writable from PC
The Card Slot is used as the memory card drive of the computer. Photo data can be written into
the memory card.
Important
If you used the Card Slot as the memory card drive of the computer, you need to do a "safe
removal" operation on your computer before physically removing the memory card from your
machine.
In Windows, right-click the Removable Disk icon and click Eject. If Eject is not
displayed on the screen, confirm that the
Access
lamp is not flashing and remove the
memory card.
On a Macintosh, drag the Mount drive icon into the Trash.
Page top
Page 293 of 681 pagesSetting Up the Card Slot as the Memory Card Drive of the Computer