Operation Manual

1.
Make sure that the machine is not reading or writing data from/to the USB flash
drive.
Check if the reading or writing operation is completed on the LCD.
Important
Do not remove the USB flash drive or turn off the power while the machine is operating.
Note
If you use the USB flash drive with the access lamp, refer to the instruction manual supplied
with the USB flash drive to check if the reading or writing operation is completed on the USB
flash drive.
2.
Remove the USB flash drive.
Hold the USB flash drive and remove it from the machine straightforward.
Page top
Page 33 of 681 pagesSaving Scanned Data