Operation Manual

A
dvanced Guide
> Changing the Machine Settings > Changing the Machine Settings on the LCD > Changing the Machine
Settings on the LCD
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extension amount as an example.
1.
Make sure that the machine is turned on, then press the Menu button.
The top menu screen is displayed.
2.
Use the button to select Device settings, then press the
OK
button.
The Device settings screen is displayed.
3.
Use the button to select a menu, then press the
OK
button.
The setting screen for the selected item is displayed.
4.
Use the button to select a setting item, then press the
OK
button.
Copy auto intensity
Prevent abrasion
Extension amount
Mobile phone setting
Bluetooth settings
PictBridge settings
Date display
Read/write attribute
Quiet mode
Key repeat
Language selection
Reset setting
Page 567 of 681 pagesChanging the Machine Settings on the LCD