Operation Manual

A
dvanced Guide
>
Troubleshooting
>
Problems with Scanning > ScanGear (Scanner Driver) Does Not Start
ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the MP Drivers are installed.
Insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and install MP
Drivers.
Check 2: On the File menu of the application, select Select Source and
select the machine.
Important
Do not select the model name that includes WIA in it.
Note
The operation may differ depending on the application.
Check 3: Start from a TWAIN-compliant application.
Page top
Page 625 of 681 pagesScanGear (Scanner Driver) Does Not Start