Operation Manual

Advanced Guide
Troubleshooting
Contents
> Routine Maintenance >
When Printing Becomes Faint or Colors Are Incorrect
> Printing the Nozzle Check
Pattern
Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
Note
If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the
FINE Cartridge whose ink is low.
See
Replacing a FINE Cartridge
.
Y
ou need to prepare: a sheet of A4 or Letter-sized plain pape
r
1.
Make sure that the power is turned on, and load a sheet of A4 or Letter-sized plain
paper in the Rear Tray.
2.
Open the Paper Output Tray gently, and open the Output Tray Extension.
3.
Print the nozzle check pattern.
(1)
Press the
Menu
button.
(2)
Select Maintenance, and press the
OK
button.
(3)
Select Nozzle check and press the
OK
button.
(4)
Select Yes, and press the
OK
button.
The Nozzle check pattern will be printed.
(5)
Confirm the displayed message and press the
OK
button.
The Check patterns screen appears
4.
Examine the nozzle check pattern.
See
Examining the Nozzle Check Pattern
.
Page top
Page 69 of 681 pagesPrinting the Nozzle Check Pattern