Operation Manual

Advanced Guide
Troubleshooting
Contents
> Routine Maintenance >
Replacing a FINE Cartridge
> Checking the Ink Status
Checking the Ink Status
You can check the ink status on the LCD.
Note
The ink level detector is mounted on the machine to detect the remaining ink level. The machine
considers as ink is full when a new FINE Cartridge is installed, and then starts to detect a remaining
ink level. If you install a used FINE Cartridge, the indicated ink level of it may not be correct. In such
case, refer to the ink level information only as a guide.
(1)
Make sure that the power is turned on, and press the
Menu
button.
(2)
Press the
(Up) or
(Down) button to select Remaining ink, and press the
OK
button.
Check if any symbol appears on the remaining ink volume screen.
Sufficient ink is left for printing if no symbol appears.
The ink with
(Ink low) is running low. You can continue printing for a while, but we recommend you to
have a new FINE Cartridge available.
Note
You can also check the ink status on a screen of the LCD displayed while printing.
Page top
Page 78 of 681 pagesChecking the Ink Status