Operation Manual

Important
Do not touch any printed part on the print head alignment sheet.
Be careful not to get the print head alignment sheet dirty. If the sheet is stained or
wrinkled, it may not be scanned properly.
(5)
When the message "Did the patterns print correctly?" appears, confirm that the
pattern is printed correctly, select Yes, then press the
OK
button.
5.
Scan the print head alignment sheet to adjust the print head position.
(1)
Load the print head alignment sheet on the Platen Glass.
Load the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark
on the
upper left corner of the sheet with the alignment mark
.
(2)
Close the Document Cover gently, and press the
OK
button.
The machine starts scanning the print head alignment sheet, and the print head position will be adjusted
automatically.
When adjusting the print head position is completed, remove the print head alignment sheet on the Platen
Page 107 of 877 pagesAligning the Print Head