Operation Manual

Advanced Guide
Troubleshooting
Contents
>
Routine Maintenance > Cleaning the Paper Feed Roller
Cleaning the Paper Feed Roller
If the Paper Feed Roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the Paper Feed Roller. Cleaning will wear out the Paper Feed Roller, so perform this
only when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Open the Paper Output Tray gently, and open the Output Tray Extension.
3.
Select Roller cleaning.
(1)
Select Settings
on the
HOME
screen, and press the
OK
button.
The Settings screen will appear.
(2)
Select Maintenance
, and press the
OK
button.
The Maintenance screen will appear.
(3)
Select Roller cleaning, and press the
OK
button.
The confirmation screen will appear.
(4)
Select Yes, and press the
OK
button.
(5)
Select the paper source to clean (Rear tray or Cassette), and press the
OK
button.
4.
Clean the Paper Feed Roller without paper.
(1)
Follow the message to remove paper in the paper source you selected in (5) of
step 3.
(2)
Press the
OK
button.
The Paper Feed Roller will rotate as it is cleaned.
5. Clean the Paper Feed Roller with paper.
(1)
Make sure that the Paper Feed Roller has stopped rotating, then follow the
message to load three sheets of A4 or Letter-sized plain paper in the paper
source you selected in (5) of step 3.
(2)
Press the
OK
button.
Page 109 of 877 pagesCleaning the Paper Feed Roller