Operation Manual

RS-MMC
*3
Memory Stick Micro
*4
*1
Use the special "SD Card Adapter".
*2
Requires purchase of a separate compact flash card adapter for xD-Picture Card.
*3
Use the special card adapter.
*4
Use the special Duo size adapter or full size adapter.
Printable Image Data
This machine accepts images taken with a camera compliant with the Design rule for Camera File
system (Exif 2.2/2.21 compliant), TIFF (Exif 2.2/2.21 compliant). Other image or movie types such as
RAW images cannot be printed.
Inserting the Memory Card
Important
When a memory card is inserted into the Card Slot, the
Access
lamp is lit. When the
Access
lamp
is flashing, the machine is accessing the memory card. In this case, do not touch the area around
the Card Slot.
Note
When Read/write attribute is set to Writable from PC, you cannot print image data from the memory
card or save scanned data on the memory card using the Operation Panel of the machine. After
using the Card Slot as the memory card drive of a computer, remove the memory card, select
Advanced settings in Device settings of Settings on the
HOME
screen, then set Read/write
attribute to Not writable from PC. For details, refer to the on-screen manual:
Advanced Guide
.
When you use a computer to edit or enhance photos saved on a memory card, be sure to print them
from the computer. If you use the Operation Panel, the photos may not be printed properly.
1.
Prepare your memory card.
Attach a special card adapter if your memory card requires one.
See
Memory Cards that Require a Card Adapter
.
2.
Turn on the power, and open the Card Slot Cover.
Page 24 of 877 pagesInserting the Memory Card