Operation Manual

the Direct Print Port.
Removing the USB Flash Drive
1.
Make sure that the machine is not writing data to the USB flash drive.
Check if the writing operation is complete on the LCD.
Important
Do not remove the USB flash drive or turn off the power while the machine is operating.
Note
If you use the USB flash drive with the access lamp, refer to the instruction manual
supplied with the USB flash drive to check if the writing operation is complete on the
USB flash drive.
2.
Remove the USB flash drive.
Hold the USB flash drive and remove it from the machine straightforward.
Page top
Page 426 of 877 pagesSaving Scanned Data on the USB Flash Drive/Memory Card Using the Operati...