Operation Manual

Advanced Guide
>
Scanning
>
Scanning with the Bundled Application Software
> MP Navigator EX Screens
> Scanner
Button Settings Tab (Save)
Scanner Button Settings Tab (Save)
On the Scanner Button Settings tab, you can specify the following settings.
This section describes the settings available when Select Event is Save to PC or Save as PDF file.
You can specify how to respond when scanning using the Operation Panel of the machine with the scan
mode set to Save to PC or Save as PDF file.
Event
Select Event
Displays the scan modes that can be selected on the Operation Panel of the machine.
Save to PC
Select this to specify the details for the scan mode Save to PC.
Save as PDF file
Select this to specify the details for the scan mode Save as PDF file.
Document Type
Select the type of document to be scanned.
Note
Auto Scan can be selected only when Save to PC is selected for Select Event. When Auto Scan
is selected, the document type is automatically detected. In that case, Document Size and
Resolution are automatically set as well.
Important
To scan correctly, select a document type that matches the document to be scanned.
The following types of documents cannot be scanned correctly with Auto Scan. In that case,
Page 569 of 877 pagesScanner Button Settings Tab (Save)