Operation Manual

Advanced Guide
Troubleshooting
Contents
>
Other Usages
> Machine Settings
Machine Settings
This section describes the items you can set or change in Device settings of the Settings menu. For
details on setting or changing, refer to the on-screen manual:
Advanced Guide
.
Plain paper feed settings
Selects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feeds
plain paper from the Cassette by default. Use this setting to change the paper source for plain
paper to the Rear Tray.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amount
Selects the amount of image that extends off the paper when making borderless copies.
Auto Photo Fix setting
Selects whether or not to prioritize printing Exif information saved on a photo when Auto photo fix ON
is selected.
Advanced settings
Date display
Selects the format of date that is printed or displayed on the screen.
Read/write attribute
Selects whether to use the Card Slot of the machine as the memory card drive of a computer.
Quiet mode
Enables this function if you want to reduce the operating noise of the machine, such as when using
the machine at night (when copying, printing from the memory card, printing from the PictBridge
compliant device, printing with wireless communication, etc.).
Guide display settings
Changes the time interval before the guide display, such as Change set. and Copy, appears at the
top of the LCD, or hides the guide display.
Key repeat
Enables to increase or decrease numbers rapidly by pressing and holding down the button when
inputting numbers. When this setting is disabled, holding down the button is the same as pressing
it once.
Mobile phone print setting
Specifies paper or image correction when you print from the wireless communication device. This
Page 63 of 877 pagesMachine Settings