Operation Manual

3.
Click the General tab and make sure that there is no indication of a problem with the
device.
If a device error is displayed, refer to Windows help to resolve the error.
Error Number: 300 Is Displayed
Check 1: If the
Power
lamp is off, make sure that the power plug is plugged in,
then turn the machine on.
While the
Power
lamp is flashing green, the machine is initializing. Wait until the
Power
lamp
stops flashing and remains lit green.
Check 2: Make sure that the USB cable is securely plugged in to the machine
and the computer.
If you are using a relay device such as a USB hub, disconnect it, connect the machine
directly to the computer, and try printing again. If printing starts normally, there is a
problem with the relay device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try
printing again.
Check 3: Make sure that your machine's name is selected in the Print dialog
box.
Opening the Page Setup and Print Dialog Box (Macintosh)
Error Number: 1700 Is Displayed
Check: See The ink absorber is almost full.
in
An Error Message Is Displayed on
the LCD
and take the appropriate action.
Ink Info Number: 1600 Is Displayed
Check: See
The following ink may have run out.
in
An Error Message Is
Displayed on the LCD
and take the appropriate action.
Ink Info Number: 1683 Is Displayed
Check: See
The remaining level of the following ink cannot be correctly
detected.
in
An Error Message Is Displayed on the LCD
and take the appropriate
action.
Ink Info Number: 1688 Is Displayed
Check: See The following ink has run out.
in
An Error Message Is Displayed on
the LCD
and take the appropriate action.
Error Number: 2001 Is Displayed
Check: See
The device may be incompatible.
in
An Error Message Is Displayed
on the LCD
and take the appropriate action.
Error Number: 2002 Is Displayed
Page 807 of 877 pagesMessage Appears on the Computer Screen