Operation Manual

Advanced Guide
>
Troubleshooting
>
MP Navigator EX Problems
> Position or Size of the Image Cannot be Detected
Correctly When Scanning Using the Operation Panel
Position or Size of the Image Cannot be Detected Correctly
When Scanning Using the Operation Panel
Check 1: Make sure that the documents are placed correctly on the Platen.
Placing Documents
Check 2: Check that the MP Navigator EX settings are correctly set
according to the document.
If you cannot scan properly with Auto Scan using the Operation Panel, specify the document type on the
Scanner Button Settings tab of the Preferences dialog box.
Scanner Button Settings Tab (Save)
Page top
Page 837 of 877 pagesPosition or Size of the Image Cannot be Detected Correctly When Scanning U...