Operation Manual

Advanced Guide
Troubleshooting
Contents
> Loading Paper / Originals > Loading Originals
Loading Originals
Loading Originals
How to Load Originals for Each Function
Originals You Can Load
This section describes the procedure to load originals on the Platen Glass.
You may have to load the original in a different position depending on the function you selected in Copy,
Easy photo reprint, or Scan. Load the original in the correct position according to the selected function. If
you do not load the original correctly, it may not be scanned properly.
Important
After loading the original on the Platen Glass, be sure to close the Document Cover before starting
to copy or scan.
Loading Originals
You can load originals to copy or scan on the Platen Glass.
1. Load an original on the Platen Glass.
(1)
Open the Document Cover.
Important
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
(2)
Load the original WITH THE SIDE TO COPY OR SCAN FACING DOWN on the
Platen Glass.
Make sure the proper position to load the original for each function.
See
How to Load Originals for Each Function
.
Important
Do not place any objects weighing more than 4.4 lb / 2.0 kg on the Platen Glass.
Do not press or put weight on the original with pressure exceeding 4.4 lb / 2.0 kg. Doing so
may cause the scanner to malfunction or the Platen Glass to break.
Page 84 of 877 pagesLoading Originals