<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MP495 Windows OS 1
<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MX495 Windows OS Preparing to Connect My Multifunction to My Network Network Requirements Notes on Wireless Connection Installing the Drivers & Software 3 3 4 5 2
Preparing to Connect My Multifunction To My Network << Previous Next >> Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.
Preparing to Connect My Multifunction To My Network << Previous Next >> An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.
Installing the Drivers & Software << Previous Next >> Software Installation To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) IMPORTANT • Log on as the administrator (or a member of the Administrators group).
Installing the Drivers & Software << Previous Next >> Installing the Drivers & Software If you connect the machine via wireless LAN setup cable before installing the software: For Windows 7 For Windows Vista/Windows XP 1. Remove the wireless LAN setup cable connected to your computer. This dialog box may appear. 2. Proceed to Step 1. 1. Remove the wireless LAN setup cable connected to your computer. If the dialog box closes, proceed to Step 1. 2. Click Cancel. 3. Proceed to Step 1.
Installing the Drivers & Software << Previous Next >> Step One Step Two Turn on the computer, then insert the Setup CDROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue.
Installing the Drivers & Software << Previous Step Three Step Four Click Easy Install Click Install Next >> The drivers, application software, and on-screen manuals are installed. Note: If you want to select particular items to install, click Custom Install.
Installing the Drivers & Software << Previous Next >> Step Five Step Six Select Use the printer on network, then click Next. Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later is required to use this software. An Internet connection is required for installation. Select Next or Skip. Selecting Next will download and install the Easy-WebPrint EX software.
Installing the Drivers & Software << Previous Step Seven Step Eight When the Printer Detection screen appears, click Next. Make sure the machine is turned on, then click OK. Next >> IMPORTANT If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in 5. Follow on-screen instructions and proceed with the installation.
Downloading and Installing the Drivers << Previous Next >> Step Nine Step Ten When the Set Up New Printer screen appears, click Next. When the Connect Cable screen appears, connect the machine to the computer with the wireless LAN setup cable Note: If the Detected Printers List screen appears, click Set Up New Printer.
Downloading and Installing the Drivers << Previous Next >> Step Eleven If the Detected Access Points List screen appears, select the target access point name/network name (SSID), enter the network key and click Connect If the Confirm Connection Access Point screen appears, make sure that the target access point is displayed,then click Yes.
Downloading and Installing the Drivers << Previous Step Twelve Step Thirteen When the Disconnect Cable screen appears, remove the wireless LAN setup cable, then click Next. Click Complete on the Setup Completion screen.
Downloading and Installing the Drivers << Previous Next >> Step Fourteen Step Fifteen Click Next on the Print Head Alignment Recommended screen. Click Next on the Setup Complete screen. At this point, setup is complete.
Downloading and Installing the Drivers Step Sixteen If the User Registration screen appears, read the information and click Next or Cancel << Previous Next >> If the Extended Survey Program screen appears: If you can agree to Extended Survey Program, click Agree. If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.).
Downloading and Installing the Drivers << Previous Step Seventeen Click Exit.