<< Previous Next >> Installing Your Multifunction to Additional Computers on Your Network PIXMA MP495 Mac OS 1
<< Previous Next >> Installing Your Multifunction to Additional Computers on Your Network PIXMA MP495 Mac OS Preparing to Connect My Multifunction To My Network Network Requirements Notes on Wireless Connection Using the Machine from Additional Computers Registering the Printer & Scanner 3 3 4 5 10 2
Preparing to Connect My Multifunction To My Network << Previous Next >> Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.
Preparing to Connect My Multifunction To My Network << Previous Next >> An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.
Using the Machine from Additional Computers << Previous Next >> Software Installation If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. To use from additional computers IMPORTANT • Log on as the administrator (or a member of the Administrators group). • Quit all running applications before installation.
Using the Machine from Additional Computers << Previous Next >> Step One Step Two Turn on the computer, then insert the Setup CDROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue.
Using the Machine from Additional Computers Step Three Step Four The drivers, application software, and on-screen manuals are installed. Click Install. << Previous Next >> Note: If you want to select particular items to install, click Custom Install.
Using the Machine from Additional Computers << Previous Next >> Step Five Step Six Select Use the printer on network, then click Next. Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later is required to use this software. An Internet connection is required for installation. Follow any on-screen instructions to proceed with the software installation. Select Next or Skip.
• Using the Machine from Additional Computers << Previous Next >> Step Seven Step Eight When the Printer Detection screen appears, click Next. Make sure the machine is turned on, then click OK. IMPORTANT If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in 5. Follow on-screen instructions and proceed with the installation.
• Using the Machine from Additional Computers << Previous Next >> Step Nine Step Ten When the Detected Printers List screen appears, click Next.
• Using the Machine from Additional Computers << Previous Step Ten (Continued) Step Eleven If the Confirm Connection Access Point screen appears, make sure that the target access point is displayed,then click Yes. Click Complete on the Setup Completion screen.
Registering the Printer & Scanner << Previous Step Twelve Setup is now complete Follow any on-screen instructions to proceed with the remaining software installation.
