Instruction manual

5.
Select DVD/CD print setting, then press the
OK
button.
6.
Use the
or
button to select Outer circle or Inner circle and use the
or
button to change the print area.
7. Press the
OK
button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/
CD and make sure you set a value smaller than the measured value for the outer
diameter, and a value larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
8.
Use the
or button to select Recommended DVD/CD or Other DVD/CD, then
press the
OK
button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD
for the suitable density printing. If not, specify Other DVD/CD.
Page top
Page 604 of 805 pagesPrinting from a PictBridge Compliant Device