Instruction manual

Using the Full
Range of Features
56
E
Digital effects can be set with the controls on the body of the camera or the
wireless controller. Pressing the ▲/▼ buttons on the wireless controller
correspond to turning the selector dial up and down, and pressing the SET button
corresponds to pressing the selector dial in.
DIGITALDIGITAL
EFFECTSEFFECTS
ON/OFF
P
SET
D.EFFECTS ON/OFF
MENU
Operating faders
Sound and image fade together.
When operating faders while recording, make sure the program selector is set to
Q.
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
2. Move the arrow up and down with the selector dial.
• Point the arrow at FADER.
3. Press the selector dial in.
• FADE-T, WIPE , WIPE , M.FADE settings appear.
4. Turn the selector dial.
• Point the arrow at your selected setting.
5. Press the DIGITAL EFFECTS button.
• The menu disappears and the name of your selected setting flashes in the
display.
6. Press the ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the ON/OFF button, the chosen fader is activated
(display lights continuously) or deactivated (display flashes).
7. If you’re in camera mode: Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
If you’re in PLAY
(MV300i:VCR) mode: Fade in- Press the
e (play) button.
Fade out- Press the
a (pause) button.
Set fader
Fader on/off
#3_MV300/MV300i_E(34-72) 3/13/00 14:58 Page 56 (1,1)