Instruction manual

57
E
Using the Full
Range of Features
Operating effects
Sound records/plays back normally.
When operating effects while recording, make sure the program selector is set to
Q.
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
2. Move the arrow up and down with the selector dial.
• Point the arrow at EFFECT.
3. Press the selector dial in.
• ART, BLK&WHT, SEPIA and MOSAIC settings appear.
4. Turn the selector dial.
• Point the arrow at your selected setting.
5. Press the DIGITAL EFFECTS button.
• The menu disappears and the name of your selected setting flashes in the
display.
6. If you’re playing back, press the e (play) button.
7. Press the ON/OFF button.
• The name of your selection stops flashing and takes effect on the display.
• Each time you press the ON/OFF button, the chosen effect is activated or
deactivated.
Set effect
Effect on/off
#3_MV300/MV300i_E(34-72) 3/13/00 14:58 Page 57 (1,1)