Instruction manual

Editing

• When you add sound using the built-in microphone make sure not to connect

any cables to the MIC terminal.

• To use your TV to monitor video, connect the S-video terminal or the A/V

terminal (use only the video plug) to your TV. You can monitor the sound with

headphones.

Audio Dubbing

You can add sound to the original sound on a prerecorded tape recorded in the SP

mode with 12-bit sound. Use the internal or an external microphone. The original

sound will not be erased.

For best results, add sound to tapes that have been recorded with this camera in

SP mode with 12-bit sound. If there are non-recorded portions on the tape, or

portions recorded in LP mode, or with 16-bit or 12-bit, 4-channel sound, dubbing

will stop. You cannot dub audio onto a tape recorded with 12-bit and 16-bit sound

intermingled.

To connect an external microphone:

#4_MV300/MV300i_E(73-84) 3/13/00 15:03 Page 80 (1,1)