Instruction manual
Table Of Contents
- MVX350i/MVX330i/MVX300
- Introduction
- Table of contents
- Basic Functions
- Preparing the Power Supply
- Loading/Unloading a Cassette
- Installing the Backup Battery
- Preparing the Camcorder
- Using the Wireless Controller
- Adjusting the LCD Screen
- Setting the Time Zone, Date and Time
- Recording Movies on a Tape
- Zooming
- Tips for Making Better Videos
- Playing Back a Tape
- Adjusting the Volume
- Playing Back on a TV Screen
- Advanced Functions
- Menus and Settings
- Using the Recording Programs
- Using the Night Modes
- Skin Detail Function
- Adjusting Exposure Manually
- Adjusting the Focus Manually
- Setting the White Balance
- Setting the Shutter Speed
- Using the Self-Timer
- Changing the Recording Mode (SP/LP)
- Audio Recording
- Using Digital Effects
- Widescreen TV Recording (16:9)
- Magnifying the Image
- Displaying the Data Code
- End Search
- Returning to a Pre-marked Position
- Date Search
- Customizing the Camcorder
- Changing the Display Language
- Other Camcorder Settings
- Editing
- Using a Memory Card
- Inserting and Removing a Memory Card
- Selecting the Image Quality/Size
- File Numbers
- Recording Still Images on a Memory Card
- Using the Flash
- Reviewing a Still Image Right after Recording
- Recording Motion JPEG Movies on a Memory Card
- Selecting the Focusing Point
- Selecting the Drive Mode
- Recording Panoramic Images (Stitch Assist Mode)
- Playing Back a Memory Card
- Protecting Images
- Erasing Images
- Combining Images (Card Mix)
- Formatting a Memory Card
- Creating a Start-up Image
- Direct Printing
- Transferring Images
- Additional Information
34
Playing Back on a TV Screen
The AV terminal also serves as headphones terminal. When “ ” is displayed on the
screen, change the setting following the procedure below.
Open the menu and select [VCR SETUP]. Select [AV/PHONES ], set it to
[AV] and close the menu.
TVs with SCART Terminal
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the PC-A10 SCART Adapter to the TV or VCR’s terminals.
3. Connect the STV-250N Stereo Video Cable to the camcorder’s AV
terminal and the audio terminals on the SCART Adapter.
Connect the white plug to the white AUDIO terminal L (left), and the red plug to the red
AUDIO terminal R (right) and the yellow plug to the yellow VIDEO terminal.
4. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
CAMERA
PLAY (VCR) CARD CAMERA CARD PLAY
MENU
(37)
VCR SETUP AV/PHONES
••
AV
STV-250N Stereo Video
Cable (supplied)
Signal flow
PC-A10 SCART
Adapter