Operation Manual
Table Of Contents
- MVX350i/MVX330i/MVX300
- Introduction
- Table of contents
- Basic Functions
- Preparing the Power Supply
- Loading/Unloading a Cassette
- Installing the Backup Battery
- Preparing the Camcorder
- Using the Wireless Controller
- Adjusting the LCD Screen
- Setting the Time Zone, Date and Time
- Recording Movies on a Tape
- Zooming
- Tips for Making Better Videos
- Playing Back a Tape
- Adjusting the Volume
- Playing Back on a TV Screen
- Advanced Functions
- Menus and Settings
- Using the Recording Programs
- Using the Night Modes
- Skin Detail Function
- Adjusting Exposure Manually
- Adjusting the Focus Manually
- Setting the White Balance
- Setting the Shutter Speed
- Using the Self-Timer
- Changing the Recording Mode (SP/LP)
- Audio Recording
- Using Digital Effects
- Widescreen TV Recording (16:9)
- Magnifying the Image
- Displaying the Data Code
- End Search
- Returning to a Pre-marked Position
- Date Search
- Customizing the Camcorder
- Changing the Display Language
- Other Camcorder Settings
- Editing
- Using a Memory Card
- Inserting and Removing a Memory Card
- Selecting the Image Quality/Size
- File Numbers
- Recording Still Images on a Memory Card
- Using the Flash
- Reviewing a Still Image Right after Recording
- Recording Motion JPEG Movies on a Memory Card
- Selecting the Focusing Point
- Selecting the Drive Mode
- Recording Panoramic Images (Stitch Assist Mode)
- Playing Back a Memory Card
- Protecting Images
- Erasing Images
- Combining Images (Card Mix)
- Formatting a Memory Card
- Creating a Start-up Image
- Direct Printing
- Transferring Images
- Additional Information
![](/manual/canon/mvx330i-digital-camcorder/operation-manual-english/images/img-14.png)
14
Loading/Unloading a Cassette
Use only videocassettes marked with the logo.
1. Slide the OPEN/EJECT switch and
open the cassette compartment
cover.
The cassette compartment opens
automatically.
2. Load/unload the cassette.
• Load the cassette with the window
facing the grip belt.
• Unload the cassette by pulling it straight
out.
3. Press the mark on the
cassette compartment until it
clicks.
4. Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover before the cassette compartment
has fully retracted.
Be careful not to get your fingers caught in the cassette compartment cover.
If the camcorder is connected to a power source, cassettes can be loaded/
unloaded even if the POWER switch is set to OFF.
Tape protection tab