Operation Manual
Table Of Contents
- MVX350i/MVX330i/MVX300
- Introduction
- Table of contents
- Basic Functions
- Preparing the Power Supply
- Loading/Unloading a Cassette
- Installing the Backup Battery
- Preparing the Camcorder
- Using the Wireless Controller
- Adjusting the LCD Screen
- Setting the Time Zone, Date and Time
- Recording Movies on a Tape
- Zooming
- Tips for Making Better Videos
- Playing Back a Tape
- Adjusting the Volume
- Playing Back on a TV Screen
- Advanced Functions
- Menus and Settings
- Using the Recording Programs
- Using the Night Modes
- Skin Detail Function
- Adjusting Exposure Manually
- Adjusting the Focus Manually
- Setting the White Balance
- Setting the Shutter Speed
- Using the Self-Timer
- Changing the Recording Mode (SP/LP)
- Audio Recording
- Using Digital Effects
- Widescreen TV Recording (16:9)
- Magnifying the Image
- Displaying the Data Code
- End Search
- Returning to a Pre-marked Position
- Date Search
- Customizing the Camcorder
- Changing the Display Language
- Other Camcorder Settings
- Editing
- Using a Memory Card
- Inserting and Removing a Memory Card
- Selecting the Image Quality/Size
- File Numbers
- Recording Still Images on a Memory Card
- Using the Flash
- Reviewing a Still Image Right after Recording
- Recording Motion JPEG Movies on a Memory Card
- Selecting the Focusing Point
- Selecting the Drive Mode
- Recording Panoramic Images (Stitch Assist Mode)
- Playing Back a Memory Card
- Protecting Images
- Erasing Images
- Combining Images (Card Mix)
- Formatting a Memory Card
- Creating a Start-up Image
- Direct Printing
- Transferring Images
- Additional Information
150
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a
Canon Service Center if the problem persists.
Power Source
Recording/Playback
Problem Cause Solution
Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery
pack.
11
Battery pack is not correctly
attached.
Attach the battery pack
correctly.
11
The camcorder switches off
by itself.
Battery pack is exhausted. Replace or charge the battery
pack.
11
Power save function has
been activated.
Turn on the camcorder.
23
Cassette compartment will
not open.
Battery pack is exhausted. Replace or charge the battery
pack.
11
Cassette compartment cover
is not fully open.
Open the cassette
compartment cover fully.
14
Cassette compartment
stopped during loading/
unloading.
Battery pack is exhausted. Replace or charge the battery
pack.
11
LCD/viewfinder switches on
and off.
Battery pack is exhausted. Replace or charge the battery
pack.
11
Battery pack will not charge. Battery packs will not charge
outside the temperature
range of 0 °C and 40°C (32°F
and 104°F).
Charge the battery pack in
temperatures between 0 °C
and 40 °C (32°F and 104°F).
–
Battery packs become hot
with use and may not charge.
Wait until the battery pack
temperature is below 40 °C
(104
°F) and retry charging.
–
The battery pack is damaged. Use a different battery pack. –
Problem Cause Solution
Buttons will not work. Camcorder is not turned on. Turn on the camcorder.
23
Cassette is not loaded. Load a cassette.
14
“ ” flashes on the screen. Cassette is not loaded. Load a cassette.
14
“ ” flashes on the screen. Battery pack is exhausted. Replace or charge the battery
pack.
11
“ ” flashes on the screen. Condensation is detected. See reference page.
145
“REMOVE THE CASSETTE”
appears on the screen.
Camcorder stopped operating
to protect the tape.
Unload and reload the
cassette.
14
The wireless controller will not
work.
[WL.REMOTE] is set to
[OFF ] in the menu.
Set [WL.REMOTE] to [ON] in
the menu.
77
The battery of the wireless
controller is exhausted.
Replace the battery.
18