Operation Manual
Table Of Contents
- MVX350i/MVX330i/MVX300
- Introduction
- Table of contents
- Basic Functions
- Preparing the Power Supply
- Loading/Unloading a Cassette
- Installing the Backup Battery
- Preparing the Camcorder
- Using the Wireless Controller
- Adjusting the LCD Screen
- Setting the Time Zone, Date and Time
- Recording Movies on a Tape
- Zooming
- Tips for Making Better Videos
- Playing Back a Tape
- Adjusting the Volume
- Playing Back on a TV Screen
- Advanced Functions
- Menus and Settings
- Using the Recording Programs
- Using the Night Modes
- Skin Detail Function
- Adjusting Exposure Manually
- Adjusting the Focus Manually
- Setting the White Balance
- Setting the Shutter Speed
- Using the Self-Timer
- Changing the Recording Mode (SP/LP)
- Audio Recording
- Using Digital Effects
- Widescreen TV Recording (16:9)
- Magnifying the Image
- Displaying the Data Code
- End Search
- Returning to a Pre-marked Position
- Date Search
- Customizing the Camcorder
- Changing the Display Language
- Other Camcorder Settings
- Editing
- Using a Memory Card
- Inserting and Removing a Memory Card
- Selecting the Image Quality/Size
- File Numbers
- Recording Still Images on a Memory Card
- Using the Flash
- Reviewing a Still Image Right after Recording
- Recording Motion JPEG Movies on a Memory Card
- Selecting the Focusing Point
- Selecting the Drive Mode
- Recording Panoramic Images (Stitch Assist Mode)
- Playing Back a Memory Card
- Protecting Images
- Erasing Images
- Combining Images (Card Mix)
- Formatting a Memory Card
- Creating a Start-up Image
- Direct Printing
- Transferring Images
- Additional Information
153
Additional
Information
E
Memory Card Operation
Printing
Problem Cause Solution
Memory card cannot be
inserted.
Memory card was not facing
the correct direction.
Turn the memory card over
and reinsert it.
90
Memory card cannot be
recorded.
Memory card is full. Replace the memory card or
erase images.
90
Memory card is not formatted. Format the memory card.
117
Memory card is not inserted. Insert a memory card.
90
File number reached
maximum value.
Set [FILE NOS.] to [RESET]
in the menu and insert a new
memory card.
93
SD Memory Card is
protected.
Change the position of the
protect switch.
90
Memory card cannot be
played back.
Camcorder is not set to
CARD PLAY mode.
Set the camcorder to CARD
PLAY mode.
109
Memory card is not inserted. Insert a memory card.
90
Image cannot be erased. Image is protected. Cancel the protection.
111
SD memory card is protected. Change the position of the
protect switch.
90
“ ” flashes red. Card error occurred. Turn off the camcorder.
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.
117
Problem Cause Solution
The printer is not operating
even though camcorder and
printer are correctly
connected.
The camcorder is set to
NETWORK mode.
1. Set the camcorder to
CARD PLAY mode.
2. Disconnect and reconnect
the USB cable.
3. Turn off the printer and turn
it back on.
–