Operation Manual
Table Of Contents
- MVX350i/MVX330i/MVX300
- Introduction
- Table of contents
- Basic Functions
- Preparing the Power Supply
- Loading/Unloading a Cassette
- Installing the Backup Battery
- Preparing the Camcorder
- Using the Wireless Controller
- Adjusting the LCD Screen
- Setting the Time Zone, Date and Time
- Recording Movies on a Tape
- Zooming
- Tips for Making Better Videos
- Playing Back a Tape
- Adjusting the Volume
- Playing Back on a TV Screen
- Advanced Functions
- Menus and Settings
- Using the Recording Programs
- Using the Night Modes
- Skin Detail Function
- Adjusting Exposure Manually
- Adjusting the Focus Manually
- Setting the White Balance
- Setting the Shutter Speed
- Using the Self-Timer
- Changing the Recording Mode (SP/LP)
- Audio Recording
- Using Digital Effects
- Widescreen TV Recording (16:9)
- Magnifying the Image
- Displaying the Data Code
- End Search
- Returning to a Pre-marked Position
- Date Search
- Customizing the Camcorder
- Changing the Display Language
- Other Camcorder Settings
- Editing
- Using a Memory Card
- Inserting and Removing a Memory Card
- Selecting the Image Quality/Size
- File Numbers
- Recording Still Images on a Memory Card
- Using the Flash
- Reviewing a Still Image Right after Recording
- Recording Motion JPEG Movies on a Memory Card
- Selecting the Focusing Point
- Selecting the Drive Mode
- Recording Panoramic Images (Stitch Assist Mode)
- Playing Back a Memory Card
- Protecting Images
- Erasing Images
- Combining Images (Card Mix)
- Formatting a Memory Card
- Creating a Start-up Image
- Direct Printing
- Transferring Images
- Additional Information
79
Editing
E
Editing
Recording to a VCR or Digital Video
Device
You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. If you connect a digital video device, you can copy recordings with virtually no
generation loss in image and sound quality.
Connecting the Devices
Connecting a VCR
See Playing Back on a TV Screen ( 34).
Connecting a Digital Video Device
Refer also to the instruction manual of the digital video device.
Recording
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
If you are connecting via AV terminal, check the setting ( 34).
2. Connected device: Load a blank cassette and set the device to record
pause mode.
3. Locate the scene you wish to copy and pause playback shortly before
the scene.
4. Play back the tape.
5. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
6. Stop playback.
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY
Signal flow
Commercially available DV Cable