Operation Manual
Table Of Contents
- MVX350i/MVX330i/MVX300
- Introduction
- Table of contents
- Basic Functions
- Preparing the Power Supply
- Loading/Unloading a Cassette
- Installing the Backup Battery
- Preparing the Camcorder
- Using the Wireless Controller
- Adjusting the LCD Screen
- Setting the Time Zone, Date and Time
- Recording Movies on a Tape
- Zooming
- Tips for Making Better Videos
- Playing Back a Tape
- Adjusting the Volume
- Playing Back on a TV Screen
- Advanced Functions
- Menus and Settings
- Using the Recording Programs
- Using the Night Modes
- Skin Detail Function
- Adjusting Exposure Manually
- Adjusting the Focus Manually
- Setting the White Balance
- Setting the Shutter Speed
- Using the Self-Timer
- Changing the Recording Mode (SP/LP)
- Audio Recording
- Using Digital Effects
- Widescreen TV Recording (16:9)
- Magnifying the Image
- Displaying the Data Code
- End Search
- Returning to a Pre-marked Position
- Date Search
- Customizing the Camcorder
- Changing the Display Language
- Other Camcorder Settings
- Editing
- Using a Memory Card
- Inserting and Removing a Memory Card
- Selecting the Image Quality/Size
- File Numbers
- Recording Still Images on a Memory Card
- Using the Flash
- Reviewing a Still Image Right after Recording
- Recording Motion JPEG Movies on a Memory Card
- Selecting the Focusing Point
- Selecting the Drive Mode
- Recording Panoramic Images (Stitch Assist Mode)
- Playing Back a Memory Card
- Protecting Images
- Erasing Images
- Combining Images (Card Mix)
- Formatting a Memory Card
- Creating a Start-up Image
- Direct Printing
- Transferring Images
- Additional Information
81
Editing
E
Recording from Analog Video
Devices (VCR, TV or Camcorder)
You can record videos or TV programs from a VCR or analog camcorder on the tape in
the camcorder.
1. Connect the camcorder to the analog video device.
See Playing Back on a TV Screen ( 34).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected device: Play back the tape.
6. Press the / button when the scene you wish to
record appears.
Recording starts.
7. Press the button to stop recording.
• Press the / button to pause recording.
• Press the / button again to restart recording.
8. Connected device: Stop playback.
Headphones cannot be used during analog line-in recording.
When connecting to a TV/Video with SCART terminal, use a SCART adapter
with input capability (commercially available). The supplied SCART Adapter
PC-A10 is for output only.
Depending on the signal sent from the connected device, dubbing may not work
properly (e.g. signals that include copyright protective signals or anomalous
signals such as ghost signals).
We recommend powering the camcorder from a household power source.
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY