Operation Manual

94
Audio Dubbing
You can add sound on a tape with the built-in or with an external microphone.
: You can also add sound from external audio devices.
This function is operated with the wireless controller.
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Dubbing
Available only in the mode.
1. Load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
: Continue directly to step 4.
: Select the audio source for the audio dubbing with the
following procedure.
2. Select ( ) the [AUDIO SETUP] menu and press ( ). Then, select
( ) the [AUDIO DUB.] option and press ( ).
3. Set it to [AUDIO IN] or [MIC.IN] and press ( ) to save the changes,
then close the menu.
4. Locate the scene you wish to start audio dubbing.
5. Press the PAUSE button on the wireless controller.
6. Press the AUDIO DUB. button on the wireless controller.
“AUDIO DUB.” and “ ” appear.
7. Press the PAUSE button on the wireless controller to begin
dubbing.
• Microphone: Speak into the microphone.
• Audio device: Begin playback.
8. Press the STOP button on the wireless controller to stop dubbing.
Audio device: Stop playback.
MENU
(63)
AUDIO SETUP AUDIO DUB. AUDIO IN
AUDIO
R
R
L
Signal flow
STV-250N Stereo Video Cable
(supplied)
Audio device
(e.g. CD player)
OUTPUT
Open the terminal cover