Instruction manual

A
dvanced Guide
> Printing Using the Operation Panel of the Machine >
Copying
>
Making Copies
> Setting Items
Setting Items
You can change the copy settings such as the page size, media type, or intensity.
In Copy mode, press the
Settings
button repeatedly to switch the item to set. Use the
button to
select the item, then press the
OK
button to set.
Note
The * (asterisk) on the LCD indicates the current setting.
The settings of the page size, media type, or intensity are retained even if the machine is turned off.
Some of setting items are not available depending on the copy method.
Enlarge/Reduce
Select the reduction/enlargement method.
Reducing or Enlarging a Copy
Ex:
Preset ratio/Magnification/Fit to page
Page size
Select the page size of the loaded paper.
Ex:
8.5"x11"(LTR)/8.5"x14"/Legal/A4/B5/A5/4"x6"(10x15cm)/5"x7"(13x18cm)
Note
Some of setting items are not available depending on the country or region of purchase.
Media type
Select the media type of the loaded paper.
Ex:
Pro II/Pro Platinum/Plus Semi-gloss/Glossy/Matte/Plain paper/Plus Glossy II
Copy intensity
Change the intensity.
Ex:
Manual adjust/Auto adjust (A)
Note
If you select Auto adjust (A), load the original on the Platen Glass.
If you select Auto adjust (A), A appears on the LCD.
Page 327 of 817 pagesSetting Items