Instruction manual

Advanced Guide
Troubleshooting
Contents
>
Faxing
> Sending Faxes
Sending Faxes
This section describes dialing and sending faxes directly using the Numeric buttons.
For details on other ways to send faxes, see Using Various Sending Functions
.
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
A
djusting the Sending Quality
Note
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching systems, you have to dial the outside line
access number first, and then the number of the party you are calling.
Sending a Fax with the Numeric Buttons
1.
Preparing for sending a fax.
(1)
Make sure that the power is turned on.
See
Operation Panel
.
(2)
Load a document on the Platen Glass or in the ADF.
See
Loading Originals.
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on the types and conditions of documents which you can fax, see
Originals
You Can Load
.
(3)
Press the
FAX
button.
The fax standby screen will appear.
(4)
Adjust the density (scan contrast) or image quality (fax resolution) as necessary.
See
A
djusting the Sending Quality
.
2.
Sending the fax.
When the document was loaded on the Platen Glass:
(1)
Use the Numeric buttons to dial the recipient's number.
(2)
Press the
Color
button for color sending, or the
Black
button for black & white
sending.
Important
Color sending requires that the recipient's fax machine supports color faxing.
(
3
)
Press the
OK
button.
Page 59 of 817 pagesSending Faxes