Office All-In-One series Getting Started Read Me First Make sure to read this manual before using the machine. Please keep it in hand for future reference.
■ Sy m b o l s U s e d i n T h i s D o c u m ent Prohibited actions. Instructions including important information. Informational notes. Operations that take some time to complete. Indicates operations in Windows. Indicates operations in Macintosh. In this guide, Windows 7 operating system is referred to as Windows 7 and Windows Vista operating system as Windows Vista. • Microsoft is a registered trademark of Microsoft Corporation.
This machine contains both printed manuals and on-screen manuals to be viewed on a computer. The on-screen manuals are included on the Setup CD-ROM and are installed during the software installation. P r i n t e d Manuals On-Screen Manuals • G e t t i n g S t a r t ed (this manual) •Network Setup Tr o u b l e s h o o t ing Describes how to set up and use your machine. Introduces the machine and its functions, the included manuals and application software.
■ Co n t e n t s 1 Check the Included Items.......................................................P.5 12 Try Using the Machine...........................................................P.64 2 Remove the Protective Material.............................................P.6 Try Copying...................................................................................... P.65 Print Photos from a Computer.......................................................... P.67 Send Faxes.................................
■ Ma c h i n e I ns t a l l a t i o n F l o w Network Connection USB Connection Wireless Connection Machine Preparation P.4 - 15 Fax Reception Setup P.16 - 18 Software Installation P.19 - 25 Wireless Connection Setup & Software Installation P.19 P.26 - 62 Installation Complete Try Using the Machine Using from Additional Computers (when the machine is already connected to the network and you want to add computers from which to use the machine) Software Installation P.63 P.51 - 62 P.
■ De v i c e s R e q u i r e d f o r W i r e l ess Connection When using the machine over a wireless connection, the following devices are required. The supplied Wireless LAN setup cable is temporarily required for wireless setup. Wireless LAN setup cable Access point or wireless router A commercial access point or router that supports IEEE802.11b/g is required.
Check the Included Items 1 Check that all the items shown below are included in the box. Color Black FINE cartridges Setup CD-ROM (containing the drivers, applications and on-screen manuals) Power cord Wireless LAN setup cable Telephone line cable This cable can be used not only for wireless connection setup but also for USB connection.
Remove the Protective Material 2 1 2 3 D C D A B Remove all the protective materials and orange tape from the outside of the machine. • The tape and protective materials may differ in shape and position from what they actually are. Open the Paper Output Tray (A). Lift the Scanning Unit (Cover) (B) and fix it with the Scanning Unit Support (C). Close the Document Cover (D) and lift it with the Scanning Unit (Cover).
4 5 1 F 2 3 E Remove the orange tape (E) carefully. The protective material (F) is removed along with the orange tape. Lift the Scanning Unit (Cover) slightly (1) and fold the Scanning Unit Support (2), then gently close the Scanning Unit (Cover) (3).
Connect the Telephone Line 3 Do not turn the power on yet. 2 Only when connecting a telephone: 1 B To use the machine as a fax, a telephone line needs to be connected. This section describes the basic method of telephone line connection. 2 A For other connection methods, refer to the on-screen manual: Basic Guide. When not using as a fax: Go to "4 Turn the Power On" on page 9.
4 1 2 Turn the Power On B A Insert the power cord into the connector on the left side of the machine and into the wall outlet. • Do not install the machine where an object may fall on it. The object may fall inside the machine, resulting in malfunction. • Do not place any object on top of the machine. It may fall into the machine when opening covers, resulting in malfunction. Press the ON button (B) to turn on the machine. • Do NOT connect the Wireless LAN setup cable (USB cable) at this stage.
3 4 C D □ Turning the power off Be sure to follow the procedure below. E 1. Press the ON button (A) to turn off the machine. 2. Make sure that the lamp (B) of the ON button is not lit. 1 A B 2 Operating noise may continue for up to 25 seconds until the machine turns off. Use the [ or ] button (C) on the Operation Panel to select the language for the LCD (Liquid Crystal Display) (D), then press the OK button. Make sure that the above screen is displayed and go to the next step.
Install the FINE Cartridges 5 1 2 E D F A 3 H E G Lift the Scanning Unit (Cover) (A) and fix it with the Scanning Unit Support (D). Close the Document Cover (E) and lift it with the Scanning Unit (Cover). Make sure that the FINE Cartridge Holder (H) moves to the installation position. • Do not touch the buttons or LCD (F) on the Operation Panel (G). May result in unintended operation. • When opening the Scanning Unit (Cover), the FINE Cartridge Holder moves automatically.
4 5 6 L K J I Open the Ink Cartridge Locking Cover Pinch (I) firmly and pull up the cover. on the right side. Remove the Black FINE Cartridge from its package. Pull the orange protective tape (J) in the direction of the arrow and remove it carefully. • Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied FINE Cartridges. • Be careful not to stain your hands or surrounding work area with ink on the removed protective tape.
7 8 Place the Black FINE Cartridge . into the right slot Push down of the Ink Cartridge Locking Cover until you hear a click to close it completely. View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle). • Do not knock the FINE Cartridge against the sides of the holder. • Install in a well-lit environment. • Install the Black FINE Cartridge into the right slot , and the Color FINE Cartridge into the left slot .
10 9 11 1 2 3 Insert the Color FINE Cartridge into the left FINE Cartridge Holder in the same way as the Black FINE Cartridge. Lift the Scanning Unit (Cover) slightly (1) and fold the Scanning Unit Support (2), then gently close the Scanning Unit (Cover) (3). • Do not touch the buttons or LCD on the Operation Panel. May result in unintended operation. Make sure that the LCD changes as shown in the illustration and go to the next step. • It takes about 1 - 2 minutes before the LCD changes.
Load Paper 6 1 2 3 D 2 A 4 1 C B Open the Paper Support (A). Move the Paper Guides (B) to both edges. Load paper in the center of the Rear Tray (C). Load paper in portrait orientation with the printing side facing up. Slide the left and right Paper Guides against both edges of the paper. Make sure that the height of the paper stack does not exceed the line (D). • For details on how to handle paper, refer to "Loading Paper" in the onscreen manual: Basic Guide after installation is complete.
Set Up for Fax Reception 7 Read this section only when using the machine as a fax. If not using the machine as a fax, go to "8 Select Connection Method" on page 19. The following four modes are available for receiving faxes. Select a receive mode according to your needs. You can change the receive mode any time. Refer to the on-screen manual: Basic Guide. Intended Use • Want to use a telephone line for voice calls and faxes.
Responses to Calls in Each Mode TEL priority mode FAX priority mode The telephone's ringtone sounds. The fax is received automatically. The fax is received automatically. DRPD While the telephone's ringtone sounds, pick up the handset. When the fax reception starts, replace the handset. FAX only mode When a fax call arrives: When a voice call arrives: While the telephone's ringtone sounds, pick up the handset to answer the call.
1 2 A B Press the FAX button (A), then press the Menu button (B). The Fax settings screen is displayed. 18 7 Set Up for Fax Reception 3 C Use the [ or ] button (C) to select Receive mode set., then press the OK button. Select a receive mode, then press the OK button. The Receive mode set. screen is displayed. The selected receive mode is displayed.
Select Connection Method 8 Intended Use Connection Method Device Required • Want to connect to a computer with a USB cable. Go to "9 Install the Software (1)" on page 20. USB Connection USB cable • Want to connect to computers without using cables. • Want to use from multiple computers. Wireless Connection Access point or wireless router What is Network? A system to exchange information between computers by connecting them to each other with cables or via wireless communication.
Install the Software (1) 9 Do not connect the USB cable yet. □ If you connect the machine via USB cable before installing the software: For Windows 7 • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) 1.
1 2 A Press the ON button (A) to TURN OFF THE MACHINE. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. Operating noise may continue for up to 25 seconds until the machine turns off. If you are using Windows, the setup program starts automatically. • Do NOT connect the USB cable to the computer and the machine yet. If you have already connected the cable, disconnect it now.
3 Windows 7/Windows Vista Windows XP/Windows 2000 Click Run Msetup4.exe on the AutoPlay screen, then click Continue or Yes on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Continue or Yes. 3 Double-click the Setup icon of the CD-ROM folder to proceed to the following screen. Enter your administrator name and password, then click OK. If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.
4 5 Click Easy Install. The drivers, application software, and on-screen manuals are installed all together. • If you want to select particular items to install, click Custom Install. For Windows 7/Windows Vista SP1 or later • You can install the XPS Printer Driver from Custom Install. When installing the XPS Printer Driver, select the MP Drivers at the same time. 6 Click Install. For Windows • To install Easy-WebPrint EX, you need to connect your computer to the internet at this stage.
Important Information for the Installation □ USB Port □ Necessary Information for the User Registration □ If the Extended Survey Program screen appears B Serial No. * * * * * * * * * When the Printer Connection screen appears, connect the machine to the computer with the USB cable. The USB Port is located on the back center of the machine. 24 9 Install the Software (1) The product serial number is required when registering the product.
7 8 Click Exit to complete the installation. For Windows: If Restart is displayed, follow the instruction to restart the computer. For Macintosh: Solution Menu starts automatically. For Macintosh: Congratulations! Setup is complete. Proceed to page 64 for information regarding the Solution Menu and the on-screen manual or page 65 to start using the machine. Click the icon on the Dock to start Solution Menu.
Set Up a Wireless Connection 10 Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete. ■ Notes on Wireless Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.
Install the S oftware (2) Do not connect the Wireless LAN setup cable yet. Software installation requires temporary use of the Wireless LAN setup cable. □ If you connect the machine via Wireless LAN setup cable before installing the software: For Windows 7 1. Remove the Wireless LAN setup cable connected to your computer. 2. Proceed to on page 28.
1 2 Windows 7/Windows Vista Windows XP/Windows 2000 Click Run Msetup4.exe on the AutoPlay screen, then click Continue or Yes on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Continue or Yes. Turn on the computer, then insert the Setup CDROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically.
3 4 Click Easy Install. The drivers, application software, and on-screen manuals are installed all together. • If you want to select particular items to install, click Custom Install. For Windows 7/Windows Vista SP1 or later Click Install. For Windows • To install Easy-WebPrint EX, you need to connect your computer to the internet at this stage. (Internet Explorer 7 or later is required.) If an internet connection is not available, it is also possible to install this software later.
5 Select Use the printer on network, then click Next. Follow any on-screen instructions to proceed with the software installation. 6 When the Printer Detection screen appears, click Next. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in . − For Windows Click Cancel and start again from network in . , then be sure to select Use the printer on − For Macintosh Follow on-screen instructions and proceed with the installation.
7 Make sure the machine is turned on, then click OK. 8 When the Set Up New Printer screen appears, click Next. • If the Detected Printers List screen appears, click Set Up New Printer.
9 □ Proceed with the installation according to the displayed screen. When the Connect Cable screen appears, connect the machine to the computer with the Wireless LAN setup cable. For Macintosh: • Follow the on-screen instructions and click Next. 32 10 Set Up a Wireless Connection The Detected Access Points List screen Go to on page 33. The Confirm Connection Access Point screen Go to on page 33.
10 - A 10 □ If the Detected Access Points List screen appears - B □ When the Confirm Connection Access Point screen appears 1 2 3 1 Select the target access point name/network name (SSID). 2 Enter the network key. Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive. To use WEP key number 2, 3 or 4, click WEP Key Number, then specify the WEP key number. 3 Click Connect. Go to on page 34. sure that the target access point is displayed, 1 Make then click Yes.
11 12 Go to "Install the Software (2) (Information)" on page 39! When the Disconnect Cable screen appears, remove the Wireless LAN setup cable, then click Next. • If the Automatic Setup or Auto Setup screen appears, click OK, then perform - . 34 10 Set Up a Wireless Connection When the Setup Completion screen appears, click Complete or OK.
I ns ta ll th e So ftware (2) (Registration) This section describes how to register the machine on a Macintosh computer. 1 □ Proceed to the section that relates to your operating system for further installation instructions. Mac OS X Windows users: read "Install the Software (2) (Information)" on page 39. v.10.6.x v.10.5.x Go to on page 36. v.10.4.11 Go to on page 36. • The alphanumeric characters after Canon MX340 series is the machine's Bonjour service name or MAC address.
2 - A Mac OS X v.10.6.x/v.10.5.x Mac OS X v.10.4.11 - 2 - B Mac OS X v.10.4.11 1 1 2 Select Canon MX340 series and click Add. When the Printer List window appears, click Add. Click More Printers in the Printer Browser window. Go to on page 37. • When the You have no printers available. screen appears, click Add.
3 3 4 Select Canon IJ Network in the pop-up menu, select Canon MX340 series in the list of printers, then click Add. Make sure that Canon MX340 series is added to the list of printers. Go to When the Register Printer and Scanner screen appears, click Register Scanner. .
4 Select Canon MX340 series on the Scan-from-PC Settings screen, then click OK. 5 Click Next on the Register Printer and Scanner screen.
I ns ta ll th e Software (2) (Information) 1 Important Information for the Installation □ Necessary Information for the User Registration □ If the Extended Survey Program screen appears A Serial No. * * * * * * * * * Click Next. Follow any on-screen instructions to proceed with the software installation. The product serial number is required when registering the product. The serial number is located inside the machine (as shown in the illustration).
2 3 Using the Machine from Additional Computers Now that the wireless connection of the machine is complete, it can be used from additional computers on the same network. Install software including the drivers on the computer from which you want to use the machine. Other settings are not required. For the software installation procedure, refer to "Install the Software (3)" on page 51. Computer from which the machine can be used currently Click Exit to complete the installation.
Wi r el es s Set up U si ng W PS (Wi-Fi P rotected S etup) Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). 1 2 A B If not using WPS, the following procedure is not necessary. • For details on WPS, refer to the manual of your access point. Use the Menu button (A) to select Device settings. Use the [ or ] button (B) to select LAN settings, then press the OK button. The LAN settings screen is displayed.
3 4 5 C Select WLAN active/inactive, then press the OK button. The WLAN active/inactive screen is displayed. 42 10 Set Up a Wireless Connection Select Wireless LAN active, then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (C) lights blue. The LAN settings screen is displayed. Select Wireless LAN setup, then press the OK button. The Wireless LAN setup screen is displayed.
6 7 Select WPS, then press the OK button. Select Push button method, then press the OK button. The WPS screen is displayed. The When the access point is ready, press [OK] of the device. screen is displayed. • To use the PIN code method for setup, select PIN code method in , then press the OK button. Follow the onscreen instructions to operate the machine and access point. When the screen in appears, press the OK button.
8 9 10 D Press and hold the WPS button on the access point (for about 5 seconds), then press the OK button on the machine within 2 minutes. For details on the WPS button pressing, refer to the manual of your access point. The Connected screen is displayed. The Wi-Fi lamp (blue) flashes while searching for or connecting to an access point. Press the OK button. Press the COPY button (D). The LAN settings screen is displayed. The copy standby screen is displayed.
Wi r e le s s Se tu p Us in g W CN (Windows Connect Now) Read this section only when setting up a wireless connection by using the WCN (Windows Connect Now) function of Windows 7/Windows Vista. If not using WCN, the following procedure is not necessary. 1 - A Windows Vista Windows 7 - (P.47) 1 2 3 From the Start menu of the Windows side, click Network. Click Add a wireless device on the menu. Click I want to add a wireless device or computer that is not on the list, using a USB flash drive.
4 5 6 7 Click Add the device or computer using a USB flash drive. From the list, select the network name (SSID), then click Next. Connect the USB flash drive to the computer, make sure that the drive name is displayed, then click Next. When the above screen appears, remove the USB flash drive from the computer, then click Close. • If the User Account Control dialog box appears, click Continue. If the same dialog box reappears in subsequent steps, click Continue.
1 - B Windows 7 1 2 3 4 Click Start > Control Panel > View network status and tasks > Manage wireless networks. Select the network name (SSID) from the list and right-click it, then select Properties. Select Copy this network profile to a USB flash drive. When the above screen appears, remove the USB flash drive from the computer, then click Close. Follow the on-screen instructions to connect the USB flash drive to the computer. Go to on page 48.
2 3 A Use the Menu button (A) to select Device settings. 48 10 Set Up a Wireless Connection 4 B Use the [ or ] button (B) to select LAN settings, then press the OK button. Select WLAN active/inactive, then press the OK button. The LAN settings screen is displayed. The WLAN active/inactive screen is displayed.
5 6 7 C Select Wireless LAN active, then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (C) lights blue. The LAN settings screen is displayed. Select Wireless LAN setup, then press the OK button. Select WCN, then press the OK button. The Wireless LAN setup screen is displayed. The Connect USB drive on which LAN details are saved and press [OK] screen is displayed.
8 9 10 E D Connect the USB flash drive to the Direct Print Port (USB connector) (D) on the front of the machine, then press the OK button. Press the OK button, then remove the USB flash drive from the machine. The Setting completed screen is displayed. The LAN settings screen is displayed. Press the COPY button (E). The copy standby screen is displayed.
Install the S oftware (3) • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) • Screens are based on Windows Vista Ultimate and Mac OS X v.10.5.x. • Quit all running applications before installation.
1 2 A Make sure that the machine is turned on and that the Wi-Fi lamp (A) lights blue. • It is not necessary to connect the machine to the computer with the Wireless LAN setup cable. 52 10 Set Up a Wireless Connection Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. For Windows • If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer.
3 Windows 7/Windows Vista Windows XP/Windows 2000 4 Click Run Msetup4.exe on the AutoPlay screen, then click Continue or Yes on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Continue or Yes. Click Easy Install. The drivers, application software, and on-screen manuals are installed all together. 3 • If you want to select particular items to install, click Custom Install.
5 6 Click Install. For Windows • To install Easy-WebPrint EX, you need to connect your computer to the internet at this stage. (Internet Explorer 7 or later is required.) If an internet connection is not available, it is also possible to install this software later. For details, refer to "Useful Software Applications" in the on-screen manual: Basic Guide after installation is complete. 54 10 Set Up a Wireless Connection Select Use the printer on network, then click Next.
7 8 When the Printer Detection screen appears, click Next. Make sure the machine is turned on, then click OK. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in . − For Windows Click Cancel and start again from network in . , then be sure to select Use the printer on − For Macintosh Follow on-screen instructions and proceed with the installation.
9 10 When the Detected Printers List dialog box appears, select Canon MX340 series, then click Next. When the Setup Completion screen appears, click Complete or OK. • If the machine is not detected, Set Up New Printer dialog box is displayed. Refer to the printed manual: Network Setup Troubleshooting. Make sure there is no problem, then click Redetect.
I ns ta ll th e So ftware (3) (Registration) This section describes how to register the machine on a Macintosh computer. 1 □ Proceed to the section that relates to your operating system for further installation instructions. Mac OS X Windows users: read "Install the Software (3) (Information)" on page 61. v.10.6.x v.10.5.x Go to on page 58. v.10.4.11 Go to on page 58. • The alphanumeric characters after Canon MX340 series is the machine's Bonjour service name or MAC address.
2 - A Mac OS X v.10.6.x/v.10.5.x Mac OS X v.10.4.11 - 2 - B Mac OS X v.10.4.11 1 1 2 Select Canon MX340 series and click Add. When the Printer List window appears, click Add. Click More Printers in the Printer Browser window. Go to on page 59. • When the You have no printers available. screen appears, click Add.
3 3 4 Select Canon IJ Network in the pop-up menu, select Canon MX340 series in the list of printers, then click Add. Make sure that Canon MX340 series is added to the list of printers. Go to When the Register Printer and Scanner screen appears, click Register Scanner. .
4 Select Canon MX340 series on the Scan-from-PC Settings screen, then click OK. 5 Click Next on the Register Printer and Scanner screen.
In s ta ll t he Software (3) (Information) 1 Important Information for the Installation □ Necessary Information for the User Registration □ If the Extended Survey Program screen appears A Serial No. * * * * * * * * * Click Next. Follow any on-screen instructions to proceed with the software installation. The product serial number is required when registering the product. The serial number is located inside the machine (as shown in the illustration).
2 3 Using the Machine from Additional Computers Now that the wireless connection of the machine is complete, it can be used from additional computers on the same network. Install software including the drivers on the computer from which you want to use the machine. Other settings are not required. For the software installation procedure, refer to "Install the Software (3)" on page 51. Computer from which the machine can be used currently Click Exit to complete the installation.
Use from Additional Computers 11 If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. Computer from which the machine can be used currently To u s e f r o m a d d i t i o n a l c o m p u t e r s 1 Insert the Setup CD-ROM into the computer from which you want to use the machine. 2 Follow the on-screen instructions to install the software. Additional computers on the same network Other settings are not required.
Try Using the Machine 12 U s e t h e Op e r a t i o n P a n e l o n t h e m a c h i n e t o p r i n t y o u r own items easily. Va r i o u s a p p l i c a t i o n s o f t w a r e a r e i n s t a l l e d o n t h e c o m p uter along with the d r i v e r s . Yo u c a n p r i n t c r e a t i v e i t e m s b y c o r r e c t i n g / e n h ancing photos using the application software.
1 2 3 Try Copying C B A D Load A4 or Letter-sized plain paper. Make sure that the Paper Output Tray (A) is open. This section describes how to perform a standard copy. • For details, refer to "6 Load Paper" on page 15. Open the Document Cover (B). Place the document face-down and align it with the Alignment Mark (C). • Do not place objects weighing 4.4 lb / 2.0 kg or more on the Platen Glass (D), or do not apply pressure to the document by pressing on it with a force exceeding 4.4 lb / 2.0 kg.
4 E F G Close the Document Cover, press the COPY button (E), then press the Black button (F) or the Color button (G). Copying will start. Remove the document after printing. • Hold the Document Cover firmly when closing it because it is heavy. • Do not open the Document Cover until copying is complete. 66 12 Try Using the Machine For the procedure to copy on paper other than plain paper, refer to "Copying" in the on‑screen manual: Advanced Guide.
Pr in t P hotos from a Computer 1 2 3 4 A Load 4" x 6" size photo paper in portrait orientation with the printing side facing up. Make sure that the Paper Output Tray (A) is open. This section explains how to print borderless photos using 4" x 6" size Photo Paper Plus Glossy II. • For details, refer to "6 Load Paper" on page 15. Start Solution Menu from the Canon Solution Menu icon on the desktop (Windows) or on the Dock (Macintosh), then click One-Click to Photo Print.
1 2 S end Faxes A C B Press the FAX button (A). The fax standby screen is displayed. This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (B). • Make sure that the telephone line type is set correctly. For the setting procedure, refer to "Preparing for Faxing" in the on-screen manual: Basic Guide. • The setting may not be available depending on the country or region of your residence.
3 4 5 E F Insert the document until a beep sounds, then slide the left and right Document Guides against both ends of the document. • Place the document face-up. Use the Numeric buttons (E) to enter the fax number. Press the Black button (F). The fax is sent. • For details on sender information, refer to "Specifying the Basic Settings for Faxing" in the on-screen manual: Basic Guide. For other procedures to send faxes, refer to "Faxing" in the on-screen manual: Basic Guide.
Maintenance 13 After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a facial tissue or the like as required. If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right automatically.
Specifications 14 Scan Specifications General Specifications Printing resolution (dpi) Interface 4800* (horizontal) x 1200 (vertical) * Ink droplets can be placed with a pitch of 1/4800 inch at minimum. USB Port: Hi-Speed USB *1 Scanner driver Maximum scanning size Scanning resolution Direct Print Port: PictBridge Bluetooth v2.0 (Option) *2 *3 *4 USB flash drive Gradation (Input/ Output) LAN Port: Wireless LAN: IEEE802.11b/IEEE802.
Minimum System Requirements Network Specifications Communication protocol Wireless LAN TCP/IP Supported Standards: IEEE802.11g/IEEE802.11b Transfer speed: IEEE802.11g: 6/9/12/18/24/36/48/54 Mbps IEEE802.11b: 1/2/5.5/11 Mbps Frequency bandwidth *1: 2.412-2.462 GHz or 2.412 GHz-2.
Getting Help from Canon Email Tech Support — www.usa.canon.com/support Toll-Free Tech Support— 1-800-OK-CANON This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holidays), during the warranty period. Telephone Device for the Deaf (TDD) support is available at 1-866-251-3752. Ordering Information The following ink cartridges are compatible with this machine.