Next>> Using Your Multifunction with Additional computers on Your Network PIXMA MX882 Windows OS 1
<> Using Your Multifunction with Additional computers on Your Network PIXMA MX882 Windows OS Preparing to Connect My Multifunction to My Network Network Requirements Important Information You Need Before Adding Your Multifunction Installing the Drivers & Software 3 3 3 5 2
Preparing to Connect My Multifunction To My Network << Previous Next >> Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment.
Preparing to Connect My Multifunction To My Network << Previous Next >> An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router. • Access Point Name/Network Name: Also referred to as SSID.
Installing the Drivers & Application Software Step One insert the Setup CD-ROM into the CD-ROM drive. If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer, then doubleclick MSETUP4.EXE. <> Step Two Click Easy Install. The drivers, application software, and on-screen manuals are installed. For Windows 7/Windows Vista: Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.
Installing the Drivers and Software Step Three On the next screen click Install <> Step Four Select Use the printer with wireless LAN connection, then click Next.
Installing the Drivers and Software <> 7
Installing the Drivers and Software <> 8
Installing the Drivers and Software <