Technical information

OPERATIONS AND TIMING
B. Using the Service Mode
4) Enter the No. of the desired service mode using
the tenkey pad on the control panel.
1) Remove the adjustment cover found below the
* EX.: If ‘0’ is entered, the indicator indicates ‘0’.
left cover (rear).
5) Press the SORT/GROUP key on the control
panel; this activates the service mode.
6) PresstheSORT/GROUPkeyonceagaintostop
execution of the service mode.
7) Press the service switch (SWl) on the adjust-
ment PCB to leave the service mode.
- The copier may also be turned OFF to leave
the service mode.
8) Attach the adjustment cover.
Figure 3-55
2) Check that the COPY START key is green.
3) Presstheserviceswitch(SW)ontheadjustment
PCB.
L
Figure 3-56
3-56
COPYRIGHT 0 1992 CANON INC.
CANON NPZl20/2GZG RN.0 MAY 1990 PAINTEG IN JAPAN [IMPRIME AU JAPONI