Technical information

W MECHANICALSYSTEM
4) Move the left cover up to remove.
5. Right Cover
1) Remove the rear cover.
2) Loosen the two mounting screws of the copy-
board glass retainer, and remove the four
mounting screws of the right cover.
0 Left cover
Figure 4-11
- Cross Section of A
NP2020
Lencover
Copierframe
Copybard glass retainer
Figure 4-12
Note:
If a sorter (sorter-Al) is attached, pull up the
left cover to remove.
4-4
NP2120
@ Mounting screws (copyboard glass retainer)
Q Mounting screws (right cover)
@ Right cover
Figure 4-13
3) Open the front right door
4) Open the right door lo remove: be careful with
the lower front cover.
COPYAIGHT 8 1992 CANON INC.
CANON NPZlZO/ZMO REY.1 OEC. 1592 PniHno IN JAPAN IIMPAIME AU JAPONI