Technical information

MECHANICALSYSTEM
2. Lens Drive Unit
1) Remove the lamp regulator
0
2)
Lamp regulator
Locking supports
Figure 4-21
Remove the four mounting screws of the scan-
ner motor; take careto keep the scanner drive
cable intact.
0
Scanner motor
0
Mounting screws
Figure 4-22
3) Slide the scanner motor somewhat, remove the
twomountingscrews,disconnecttheconnector,
and remove the lens drive unit.
@ Lens drive unit
Q Connector
@ Mounting screws
Figure 4-23
3. Lens Cable
Route the lens cable as shown in Figure 4-20.
4-8
COPYRIGHT G 1542 CANON ING.
CAWON NPZl20/ZMO REY.0 MAY 1990 PRINTED IN JAPAN [IMPRIME AU JAPONI