Technical information

MECHANICALSYSTEM m
W The paper paper will show contraction caused
by heat after it has gone through the copier.
4) PlacepaperAandpaperBtogetheralignedover
the left lines, and adjust the No. 1 mirror mount
so that distances x and y in Figure 4-27 are
5. Lubrication
Clean the scanner rail; thereafter, apply lubricant
evenly along the rail.
- Copied (A)
- Fed (B)
Figure 4-27
x=y
X’Y
X<Y
Correct.
Move the No. 1 mirror mount in the
direction of a.
Move the No. 1 mirror mount in the
direction of b.
Note:
IfthedistancebetweentheNo. 1 and2mirrors
is too short, the copy image will be enlarged
and if too long, reduced.
No. 1 mirror mount
Mirror drive cable
COPYRIGNT 0 1992 CANON INC.
CANON NPZlZWZMO RN.0 MAY 15’30 PAINTEO IN JAPAN (IMPRIME AU JAPONI
4-11