Technical information

5.
1)
0”
2)
0
3)
4)
Feeder Rollers (1, 2)
Remove the feeder rollerclutch using a hex key.
Feeder roller clutch
Hex key
Figure 4-39
Remove the E-ring and gear; be careful with the
parallel pin.
E-ring
Gear
Figure 4-40
Open the front door, and remove the insideOpen the front door, and remove the inside
covers (left, right).covers (left, right).
Remove the E-ring and bushing, and remove theRemove the E-ring and bushing, and remove the
feeder oller. feeder oller.
COPYAIGNT 62 1992 CANON INC.
CANON NPZl20/2MO REY.0 MAY 1590 PAINTEO IN JAPAN [IMPRIME AU JAPONI
@ E-ring
@ Bushing
Figure 4-41
6. Manual Feed Pick-Up Woller (NP2020)
1) Remove the right cover.
2) Remove the manual feed pick-up unit; two
mounting screws, one connector.
@ Manual feed pick-up unit @ Connector
0 Mounting screw
Figure 4-42
Figure 4-43 Manual Feed Pick-Up Unit
3) Remove the E-ring and bushing, and removethe
manual feed pi&up roller.
@ E-ring
0 Manuaal feed pick-up roller
Figure 4-44
4-15