Technical information

5) Remove the hook, and remove the grip
Figure 4-76
6) Remove the three screws, and remove the
developing cylinder holder (front), washer, and
developing roll.
@ Developing cylinder holder
Q Developing ro11
@l Screws
9) Remove the two E-rings and two gears
@ E-rings
0 Gears
Figure 4-78
10) Remove the two screws, and remove the
developing cylinder holder (rear), ball bearing,
and developing roll.
@ Developing cylinder holder
@ Balf bearing
@ Developing roll
@ Screws
Figure 4-77
Figure 4-79
11) Remove the developing cylinder and side seal.
4-26
COPYAIGHT 0 1992 CANON ING.
CANON NPZlZO/ZMO KV.0 MAY 1990 PAINYEO IN JAPAN [IMPRIME AU JAPONI