Technical information

11. Removing the Upper Separation
Claw
1) Open the delivety unit.
2 Mark the position of the upper separation claw
retainer using a scriber.
3) Removethe three mountingscrews, and remove
the upper separation claw retainer; be careful
with the delivety detection lever at the time.
@ Mounting screws
@ Upper separation claw retainer
@ Delivery detection lever
Figure 4-102
4) Remove the spring, and remove the upper
separation claw.
12. Mountingthe Upper Separation Claw
Reverse the steps above to mount the upper
separation claw with the following in mind:
- Keep the upper separation claw unit to the rear;
if a scar is made on the upper fixing roller, mount
the claw about 4 mm displaced to the front.
13. Removing the Lower Separation
Claw
1) Open the delivery unit.
2) Slidethelowerseparationguideplatetoremove.
@ Lower separation guide plate
Figure 4-103
3) Remove the spring, and remove the lower
separation claw.
COPYRIGHT Q 1592 CANON INC. CANON NP2¡20/2MO RN.0 MAY 1990 PRINTEU IN JAPAN IIMPAIME AU JAPONI
4-33