Technical information

Figure 5-4
Figure 5-7
3) Fixthestopplate inplaceusingscrews(M4XlO).
7)
8)
Place about 100 sheets of paper (fresh out of
package, of thedesired size) in thecassette, and
butt them against the front of the cassette.
Keep the side stop plate between the bunch of
sheets and size plate as shown, and screw the
size plate using a screw; make sure that thesize
plate is butted against the side stop plate.
Note:
See “Replacing the Cassette Spring” when
using a different type of spring.
4) Remove the side stop plate each from the two
cassettes.
Side sfop plate
Sh
Figure 5-5
5) Remove the two screws that hold the paper size
plate in place.
Figure 5-6
6)
Slide the paper size plate along the index on the
bottom of the cassette to suit the desired paper
size.
,
Figure 5-8
9) Fix the side stop plate in its original location.
COPYRIGHT Q 1092 CAWON NC.
CAIIOR HPZl2WWl RN.0 MAY 1590 PAINTEU IN JAPAN IIMPAIME AU JAPOW]
5-9