Technical information

MECHANICALSYSTEM
3) Detach the three partitions.
4) Fit the partitions into the holes corresponding to
the desired size.
n Use a sheet of thedesired size as referente
to facilitate the work.
Thepaperdeckcan bemodifiedtosuit thesizeof
the paper to be used (A4 or LTR) by relocating the
three partitions and resetting the DIP switch.
Modifying the Deck Size
1) Detach the rear cover from the pedestal.
2) Detach thestopper plate, and take out the deck.
Figure 3-219
Figure 3-220
COPYNICNT Q 1592 CANON INC.
LTR
TA4
A4
LTR.
Figure 3-221
5) ResettheDIPswitchonthedeckcontrollerPCB.
LEtter
A4
Figure 3-222
6) Setthedeck,attachthestopperplate, andattach
the rear cover.
CANON NPa20,2MO RN.0 MAY 1930 PNINNI IN JAPAN IIMPAIME AU JAPONI
3-7P