Technical information

4. fblovement of Scanner in Page Separation Mode (2 documents)
Documentleading
edgeof Istpage
Documentleading
Documentleading
Documentleading
edgeof istpage
edgeof Istpage
edgeof Istpage Documentleading
Documentleading
Forward.i-kForward
Reverse
i--i-Fo¡ward+-&Fonvard&=
Reverse Reverse
Figure 3-18
1, ll, and III shown in Figure 3-18 are controlled with
referente to the document leading edge (falling
edge of 04) of the first page.
1: The distance over which the scanner moves
from the document leading edge is determined
by the reproduction ratio and cassette size as in
the normal copy mode.
II: It is more or less identical to 1; however, if the
distance over which the scanner moves forward
is longer than 210 mm/8.3 in (115/220/24OV
models), 210 mmB.3 in (216 mm/85 in) will be
identifiedas thereferencetothedocument lead-
ing edge.
Ifthedistanceisshorterthan2lOmm/8.3in(216
mm18.5 in), the point at which the scanner re-
verses will be identified as the document leading
edge of the second page.
III: Same as 1.
Note:
The distance over which the scanner moves
cannot exceed 432 mm/1 7 in from the docu-
ment leading edge (the point reached by the
scanner having moved forward 10 mm/0.4 in
from the falling edge of Q4); further, the dis-
tance is limited by the specified reproduction
ratio.
In the case of enlargement by 200%, the
distance is 216 mm18.5 in max.
3-20
COPYAIGNT 0 1992 CANON ING. CANON NPZlZO/ZMO RN.0 MAT 1590 PAINTEO IN JAPAN IIMPRIME AU JAPONI