Technical information

B?BI OPERATIONSANDTIMING
‘1
‘2
165”C/329”F 17OYY336”F
(145”C/293”F)(150’C/302°F) ~~ ~~ ~~
POWER switch
rlFF
controlled at 150°C/302”F (CT unit)
Figure 3-44
When the copier enters the pre-heat mode in response to a press on the PREHEAT key, the temperature of
thefixing assemblyiscontrolled to 140°C regardlessofwhetherthe blackdevelopingassemblyorCTunit isused.
However, in the case of the NP2120, the temperature is controlled as in the standby period.
‘1 140°C; if NP2120, 160%.
'2 155°C: if NP2120, 170°C.
3-46
COPYRIONT 0 199’2 CANON INC.
CANON NP2l20/2020 REY.1 OEC. 1992 PRINTEO IN JAPAN IIMPAIME AU JAPON)