Operator`s manual

3-7

Special Features

Select the size of the book when opened, then

press the [OK] key.

After you have finished making the settings,

press the [DONE] key.

Proceed to copy in the usual manner.

(See “Making Copies,” on p. 2-4.)

MEMO:

● To cancel the settings, press the [SPECIAL

FEATURES], [FRAME ERASE], and [C] keys in that

order.

● You can also cancel the mode by pressing the

Reset

key. (The copier returns to the Standard mode.)

Binding Erase (Erase Binding Holes on Copies)

Erases the shadows that can appear in copies from binding holes on originals.

Place your original on the platen glass.

(See p. 2-17.)

NOTICE:

● Place the original on the platen glass so that the

binding holes are on the right side of the original.

Press the [SPECIAL FEATURES] key, then

press the [FRAME ERASE] key.