Operator`s manual

3-22
Select the Auto Count function or specify the
number of originals.
■ If you want the originals to be counted
automatically, press the [OK] key.
MEMO: ● If you place your originals in the RDF, the originals
are counted automatically. Counting is performed to
ensure that Image Combination is performed from
the first page of the originals.
5
■ Specifying the number of originals
Press the [CANCEL COUNT] key.
Specify the number of originals using the [+] and
[–] keys, or the Number keys (
1
-
0
), then
press the [OK] key.
• Press the [+] key to increase the number of
originals.
• Press the [–] key to decrease the number of
originals.
• To directly enter the number of originals, press
the Number keys (
1
-
0
).
MEMO: ● You can change the number of originals entered
with the Number keys, using the [+] and [–] keys.
Press the [PAPER SELECT] key to manually
select the copy paper size. (See “Manual Paper
Selection,” on p. 2-24.)
NOTICE: ● You cannot set Auto Paper Selection; manually
select a paper size (see p. 2-16).
MEMO: ● The copier automatically selects the copy ratio
depending on the selected paper size (Auto Zoom).
After you have finished making the settings,
press the [DONE] key .
6
Proceed to copy in the usual way.
(See “Making Copies,” on p. 2-4.)
MEMO: ● To cancel the settings, press the
Reset
key.
(The copier returns to the Standard mode.)