Operator`s manual

4-20

Select ZOOM FINE ADJUSTMENT.

Select the mode to be changed.

Follow the procedures described below to make

changes to various functions.

Press the [DONE] key.

MEMO:

● When you are finished setting Additional Functions,

press the [DONE] key again.

■ Zoom Fine Adjustment

If there is a slight difference in size between the original

and output copy images when the copy ratio is set to

100% (direct), use this function to correct the error.

Adjustments can be made independently in the X and Y

directions. You can perform adjustments to ±1%, in 0.2%

increments.

Press the [ ] or [ ] key to make fine

adjustments. Then, press the [OK] key.

To increase the copy ratio, press the [

] key.

To decrease the copy ratio, press the [

] key.

MEMO:

● Confirm fine adjustments by making copies and

comparing them with the original.

Copy