Operator`s manual

5-7
Loading Paper and
Adding Toner
Grip the handle of the paper drawer. Gently
slide the Side Paper Deck back into the copier
until it clicks into place in the closed position.
CAUTION:
● When closing the Side Paper Deck, be careful not to
get your fingers caught in it, as this may result in
personal injury.
4
Adjusting a Paper Drawer to Hold a Different Paper Size
If you want to load a new paper size in a paper drawer, follow the procedure described below to
adjust the paper drawer guides.
You can adjust the paper drawers to hold the following standard paper sizes: 11" x 17", LGL,
LTR, LTRR, STMT, and STMTR.
NOTICE: ● The paper sizes loaded in the lowest drawer can be changed as necessary to meet your
copying needs.
● The sizes loaded in other drawers must be changed by your service representative. For more
details, contact your service representative.
Squeeze the lever on the length guide as shown
in the figure. Without releasing the lever, slide
the length guide to align it with the mark for the
desired paper size.
1
When loading 11" x 17" -size copy paper, slide
the length guide all the way to the left, and drop
it downward.
Length guide